Baldwin Sliding Door Lock Installation Instructions

Aug 02, 2011 Adding new door hardware to your front door can add a hole new look look to the front of your home. Check out all Baldwin Products here http://www.build. Baldwin Sliding Door Lock Installation Instructions Baldwin Pocket Door Locks Baldwin Pocket Door Locks And Cylinders Baldwin Hardware Baldwin Sliding Door Locks. Baldwin 0458150 sliding door flush pull satin nickel lock installation instructions locks pocket. Baldwin pocket door privacy lock antique.

You'll find the quality, peace of mind, and beauty you expect from Baldwin in every door lock. Baldwin Door Knob Installation Instructions. The Baldwin Spyglass lever handle uses a turn button lock on its privacy and Baldwin Prestige. Patio And Pocket Door Hardware / Sliding Door locks. Support Videos. Removing mortise lock trim for door painting or replacement. Step by step installation guide for rim lock installation.

Adding new door hardware to your front door can add a hole new look look to the front of your home. Check out all Baldwin Products here Chrysten Cotney of Build.com shows how adding new hardware to your front door can improve the look of your house.

Disclaimer: Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no guarantee, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information.This disclaimer applies to both isolated and aggregate uses of the information. Build.com provides this information on 'supplemental' basis. Product uses and specifications, and material safety data are disclaimed.

If you find any errors, we encourage you to report them to Build.com's Media Department by contacting media@build.com.

Measure 38 inches from the floor, and mark with a pencil on the edge of the door. This is the height to place the lock on the door. Measure the thickness of the door, and mark the center point on the edge of the door where it crosses the 38-inch mark. Place the template on the face of the door so the center of the template is over the 38-inch mark, and use a pencil to mark where to locate the backset. Position the backset 2 ¾ inches from the edge of the door to the center of the handle. Drill a 2 1/8-inch hole into both the sides of the door with a hole saw for the knob.

Slide a 1-inch spade bit into the edge of the door where the center mark of 38 inches is. Cara Install Script Di Greasemonkey Firefox there. Drill the hole 2 ¾ inches. Take care to hold the spade level while drilling. Press the latch into the hole drilled in the edge of the door.

Trace around the plate of the latch, and mark the screw holes with a pencil. Remove the latch, and set it aside.

Chisel away the area inside the traced area with a ½-inch chisel until it is 1/8-inch deep or the faceplate is flush with the edge of the door. Slide the latch back into the hole on the edge of the door, and press until the faceplate is flush with the edge of the door. Push the square drive tube of the handle through the square hole of the latch on the side of the door that the keyhole should appear on. Take care to ensure the edges of the knob are lined up with the latch. Fasten the inside adapter assembly to the outside knob assembly with the provided machine screws on the inside of the door. Place the doorknob base onto the inside adapter, and twist clockwise until it is against the door surface. Slide the inside doorknob over the lever, and tighten the set screw with an Allen wrench.